Siemens SIPROTEC 7SS523 V3.2 Manual page 76

Configuration
4.3.9 Saving the Substation Chart
60
To save elements as Typical you must:
Select all elements in the chart you wish to save together as Typical.
Click Edit →Save Graphic/Typical as on the menu bar. The Save as dialog box
opens.
Enter a name for the Typical file. A Typical file has the extension .sst.
Select the location where you want to save the Typical file.
Click OK to apply the settings and to close the dialog box. The elements are saved
to a file in the form of a Typical.
To insert a Typical you must:
Click Edit →Insert Graphic/Typical from on the menu bar. The Open dialog box
pops up.
Select the drive of the Typical file from the Browse drop-down list box.
Select a folder in the drop-down list box. You will find the supplied template files in
the folder SSTypicals.
All available files with the extension .sst are displayed in the box. Select the name
of the Typical file you wish to open.
Click OK to open the Typical file and to close the dialog box.
Left-click into the chart to insert the Typical.
You must explicitly save the modifications you have made to a chart.
To save the changes in the active chart you must:
Click Chart →Save on the menu bar.
Alternatively, you can click the button on the Standard toolbar.
7SS52 V4 Manual
C53000-G1176-C182-1