Siemens SIPROTEC 7SS523 V3.2 Manual page 56

Getting Started
3.6 Operation of SIPROTEC Devices from the Operator Panel
3.6.1 User Interface
3.6.2 Navigating the Operating Tree of the Display
Central unit
Bay unit
40
In addition to operating your station with the DIGSI software (see Chapter 6, page
203), the 7SS52 V4 allows you to operate the central unit and the bay units 7SS523
locally from the user interface on the device.
The following sections describe succinctly in a few typical operations how to navigate
the user interface from the integrated operator panel. The illustrations of the examples
show each menu completely. The display on the device shows only 4 lines at a time.
The user interface of the central unit and the bay unit is composed of a hierarchically
structured operating tree which is navigated by means of the navigation keys and the
keys: (only in the central unit),
MENU
With the device ready for operation, press first the key
MENU.
Next, select with the navigation keys
tion key to enter the submenu.
Go on moving in the same way through the operating tree until you have reached
the information you are looking for.
To move back one level, press the navigation key
To move back menu item, press the navigation key
Be pressing again the key
the MAIN MENU.
Select a menu item directly with the navigation keys
gation key to enter the submenu.
Go on moving in the same way through the operating tree until you have reached
the information you are looking for.
To move back one level, press the navigation key
To move back menu item, press the navigation key
Be pressing the key
ENTER and ESC
or
or by repeatedly pressing the key
MENU
ESC you return to the next higher level.
.
, to enter the MAIN
MENU
a menu item and press the naviga-
.
.
ESC
or and press the navi-
.
.
C53000-G1176-C182-1
you return to
7SS52 V4 Manual