Siemens SIPROTEC 7SS523 V3.2 Manual page 273

Device-specific
functionality
Figure 7-3 Setting the authorization for the Web Monitor for an access via Ethernet interface
In addition to the general basic functionality, the Web-Monitor for the 7SS52 offers the
option of displaying the firmware version of the bay units and for the modules of the
central unit. In addition, the HDLC status (HDLC = High Level Data Link Control) of the
internal serial interfaces can be called.
With the Web monitor you can
• calle the firmware status of central units (Figure 7-6, page 259) and bay units (Fi-
gure 7-7, page 259),
• call the HDLC status (HDLC = High Level Data Link Control) of the internal serial
interfaces (Figure 7-5, page 258), and
• remotely control the keybord on the operator panel of the central unit (Figure 7-8,
page 260)
• and further functions such as access to the device file system.
The access point for the isolator replica files is:
\\DISTURBLST for disturbance cases and \\ISOLATORLST for the system and
protection view.
• The measured values of the currently displayed bay units can be stored in the
measured value overview.
For more details, please refer to the corresponding Online Help.
The following figures show some examples. The annunciations from the operational
annunciation buffer of the device are displayed in the form of a list here. These annun-
ciations are displayed with their short text stored in the device.
7SS52 V4 Manual
C53000-G1176-C182-1
Commissioning
257