Siemens SIPROTEC 7SS523 V3.2 Manual page 72

Configuration
Figure 4-11 DIGSI Plant Configuration - Inserting dynamic elements - Example
56
Note
A bay (feeder bay or bus coupler) must comprise at least one isolator, one current
transformer an exactly one circuit breaker.
Isolators, transformers and circuit breakers have properties whose values must be set
individually.
To specify the property values of a dynamic element you must:
Right-click a single element. Click Object properties in the context menu. A prop-
erties dialog opens for the selected element.
Make the required settings.
Click OK to apply the settings and to close the dialog box.
Note
Further information on setting the element property values can be found in the on-line
help of the DIGSI Plant Configuration.
7SS52 V4 Manual
C53000-G1176-C182-1