Siemens SIPROTEC 7SS523 V3.2 Manual page 407

Appendix
A.17 Marshalling - Bay Unit 7SS525
Table A-30 Marshalling of the binary inputs of the bay unit 7SS525
Address 1st display line
6101 BINARY INPUT1
6102 BINARY INPUT 2
6103 BINARY INPUT 3
6104 BINARY INPUT 4
6105 BINARY INPUT 5
6106 BINARY INPUT 6
6107 BINARY INPUT 7
6108 BINARY INPUT 8
6109 BINARY INPUT 9
6110 BINARY INPUT 10
NO: NO contact (active when energized)
NC: NC contact (active when not energized)
Table A-31 Marshalling Signal Relays of the bay unit 7SS525
Address 1st display line
6201 SIGNAL RELAY 1
391
When the device is delivered, annunciations are marshalled to the binary inputs, re-
lays, and LEDs for the maximum scope. The functional keys are pre-assigned. The
marshalling can be found in Table A-25, page 388 to Table A-29, page 390.
2nd display line
>Isolator1on
>Isolator1off
>Isolator2on
>Isolator2off
>CB ON
>CB OFF
not marshalled
not marshalled
not marshalled
>CB man.close
2nd display line
Bay o.of serv
FNo.
NO 7601 >Isolator 1 - position closed
NO 7602 >Isolator 1 - position open
NO 7603 >Isolator 2 - position closed
NO 7604 >Isolator 2 - position open
NO 7623 >Circuit breaker closed
NO 7617 >Circuit breaker open
NO 1 No function assigned to this input
NO 1 No function assigned to this input
NO 1 No function assigned to this input
NO 7618 >Circuit breaker manual close
FNo.
7640 Bay is out of service
Comment
Comment
7SS52 V4 Manual
C53000-G1176-C182-1