High Voltage Power Supply Board - Kyocera FS-C1020MFP Service Manual

Replacement and Adjustment
11. PSU [F] ( x 4)
There are two types of PSUs for this model. Do not install a wrong PSU in the
machine.
PSU has yellow [a] on the transistor is for NA models and PSU has green [b] on the
transistor is for EU models.
Fuse
There is the removable fuse on the PSU.
Fuse No.
FU101: NA
FU101: EU, ASIA
Use a correct rating fuse for the fuse replacement. Never use a wrong rating fuse. If
do so, the machine may be damaged.
Never try direct connection of PSU circuit without a fuse.

High Voltage Power Supply Board

1. Remove all AIO cartridges.
1. Operation panel (→ p.17)
2. Rear cover (→ p.16)
3. Right cover (→ p.18)
Rating
15 A, 125V
6.3A, 250V
66