Updating Failure - Kyocera PE-MF2 Service Manual

5. System Maintenance Reference
Message
USB Upload : FAIL
5
*1: "X" indicates an error code.

Updating Failure

If the initial screen does not appear and the message below remains on the operation panel display for
more than one minute following firmware update, a power failure or similar interruption prevented the
update from completing.
If this happens, use the following procedure to recover from the failure and complete the update.
• To recover the machine following a failed update, the machine must be connected to a computer by
USB.
• When using a computer running on a Windows operating system, you must have an account that has
Manage Printers permission. Log on as an Administrator or Power Users group member to acquire
this permission.
1. If you performed the update through a network connection, disconnect the network cable, and then
connect the machine to your computer using a USB cable.
2. While "Initializing" is shown on the operation panel display, double-click the [UpdateTool.exe] icon
to launch the firmware update tool.
3. Click [F/W Update (USB)].
4. Wait until "Please Download FW Again Now!" appears on the operation panel display.
Make sure that you keep the power of the machine turned on.
106
Cause/ Solutions
The [F/W Update (USB)] or [F/W Update (NET)] button was
clicked when the update was already in progress.
• Clicking the [F/W Update (USB)] or [F/W Update (NET)]
button during the update process does not interfere with any
ongoing update.
• Ignore this error message and complete the update using the
procedure shown in this manual.
The machine is being operated through the operation panel.
• Cancel any operations being performed through the
operation panel.
• Put the machine into standby mode, and then perform the
update again.