Updating The Engine Firmware - Kyocera PE-MF2 Service Manual

5. Click [F/W Update (USB)] again.
6. Check the operation panel display for messages and the update's current percentage of completion.
The update may take a while to complete. Do not turn off the power during the update.
Turn off the power only when the machine beeps and "Firmware Update Done Please Reboot."
appears on the operation panel display.
7. Wait until the machine beeps once and "Firmware Update Done Please Reboot." appears on the
operation panel display.
Click [Close] to close the update tool.
8. Turn off the power, and then turn it back on.
After you turn the power back on, "Initializing" appears on the operation panel display.
9. Wait until the initial screen appears on the operation panel display.
10. Press any menu key on the machine's operation panel.
11. Press the [ ] [ ] keys to select [Reports Print], and then press the [OK] key.
12. Press the [ ] [ ] keys to select [Configuration Page] and then press the [OK] key.
Take note of the new firmware version (shown under "Firmware Version" on the configuration page).
13. Reconnect the telephone line cable to the machine.
• The update's percentage of completion might not be displayed, depending on which version of the
firmware is currently installed.
• In addition to printing a configuration page, you can check the machine's firmware version by
accessing the machine using a web browser. For details, see "Checking Machine Status" in the User
Guide.
• Depending on how it is configured, the machine might start up in fax mode following the firmware
update.

Updating the Engine Firmware

1. Make a folder in your computer.
2. Save the files (".bin", ".fwu", ".ini" and ".exe") in the folder.
Firmware Updating
5
107