Lexmark XM3250 Service Manual page 171

Fax error log codes
Error code
000
200
3XX
4XX
5XX
6XX
7XX
800
802
803
804
805
808
Description
No error occurred during a fax
transmission.
An error occurred when transmitting
training.
An error occurred when receiving an
image data.
An error occurred when sending an image
data.
An unknown response is received from a
remote fax device.
An error occurred when receiving a frame.
An error occurred when sending a frame.
An EOT was unexpectedly received from
the modem in V34 mode.
Too many time‑outs occurred during ECM
reception.
Fax cancelled by the user.
Unexpectedly received a disconnect
command from the remote end.
The remote fax device failed to respond to
the DCS command.
T1 timeout occurred when trying to
establish a connection with a remote fax
device.
Diagnostics and troubleshooting
171
Action
No action is needed.
•
Check the line quality.
•
Select a lower Max Speed value
under the Fax Send settings.
•
Adjust the transmit level.
•
Check the line quality.
•
Adjust the Receive Threshold.
•
Select a lower Max Speed value
unde the r Fax Receive settings.
•
Check the line quality.
•
Adjust the Transmit Level.
•
Select a lower Max Speed value
under the Fax Receive settings.
No action is needed. The issue is with
the other device.
•
Check the line quality.
•
Adjust the Receive Threshold.
•
Check the line quality.
•
Adjust the Transmit Level.
•
Select a lower Max Speed value
under the Fax Send settings.
If the error persists, then disable the V34
modulation scheme.
If the error persists, then disable the
ECM mode.
No action is needed.
•
Check the line quality.
•
Adjust the Transmit Level or Receive
Threshold setting.
•
The remote device could be
requesting an unsupported feature.
•
Adjust the Transmit Level or Receive
Threshold setting.
•
The remote device could be
malfunctioning.
Adjust the Transmit Level or Receive
Threshold setting.
7018