Lexmark XM3150 Fax Manual

Fax Guide
The fax function lets you scan items and fax them to one or more recipients. You can send a fax from the printer by typing the
fax number, using a shortcut number, or using the address book.

Sending a fax using the printer control panel

1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the home screen, touch Fax.
4
Enter the fax number or a shortcut.
Note: To add recipients, touch Next number, and then enter the recipient's telephone number or shortcut number, or
search the address book.
5
Touch Fax It.

Sending a fax using the computer

The printer driver fax option lets you send a print job to the printer, which sends the job as a fax. The fax option works as a normal
fax machine, but is controlled through the printer driver instead of the printer control panel.
1
With a document open, click File > Print.
2
Select the printer, and then click Properties, Preferences, Options, or Setup.
3
Navigate to:
Fax tab > Enable fax
4
Enter the recipient fax number or numbers in the "Fax number(s)" field.
Note: Fax numbers can be entered manually or by using the Phone Book feature
5
If necessary, enter a prefix in the "Dialing prefix" field.
6
Select the appropriate paper size and page orientation.
7
If you want to include a cover page with the fax, then select Include cover page with fax, and then enter the appropriate
information.
8
Click OK.
Notes:
•
The Fax option is available for use only with the PostScript driver or the Universal Fax Driver. For information on installing
these drivers, see the Software CD.
•
The Fax option must be configured and enabled in the PostScript driver under the Configuration tab before it can be used.
• If the Always display settings prior to faxing check box is selected, then you are prompted to verify the recipient
information before the fax is sent. If this check box is cleared, then the queued document is sent automatically as a fax
when you click OK on the Fax tab.
Fax Guide
Page 1 of 4