Lexmark XM3250 Service Manual page 148

Optional tray pass‑through drive failure service check
Action
Step 1
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics and adjustments > Motor tests >
Pass‑through (tray [x])
b
Touch Start.
Does the motor run?
Step 2
Reseat the motor cable, and then reseat the cable on the optional
tray controller board.
Does the problem remain?
Step 3
a
Remove the optional tray.
b
Under the printer, check the interconnect cable for damage.
Is the cable free of damage?
Step 4
Replace the interconnect cable. See
removal" on page 240.
Does the problem remain?
Step 5
Reinstall or replace the optional tray.
Note: Make sure that the interconnect cable properly fits with the
socket on the optional tray.
Does the problem remain?
Step 6
Remove the tray insert from the source tray, and then check it for
damage.
Is the tray insert from the source tray free of damage?
Step 7
Replace the tray insert.
Does the problem remain?
"Interconnect cable
Diagnostics and troubleshooting
148
Yes No
Go to step 3. Go to step 2.
Go to step 3. The problem is
solved.
Go to step 5. Go to step 4.
Go to step 5. The problem is
solved.
Go to step 6. The problem is
solved.
Contact the next Go to step 7.
level of support.
Contact the next The problem is
level of support. solved.
7018