126 Errors - Lexmark XM3250 Service Manual

Action
Step 4
a
Turn off the printer, and then unplug the power cord.
b
Remove the power supply. See
page 273.
c
Check the power supply, including its fuse and
capacitors, for damage.
Is the power supply free of damage?
Step 5
Replace the power supply. See
page 273.
Does the problem remain?
Step 6
Check the fuser for problems. See
page 132.
Does the problem remain?

126 errors

126 error messages
Error code Description
126.05 The LVPS power dropped but the printer was not
in sleep mode.
126.06 LVPS 25V line error was detected.
126.07 LVPS 5V rail was down during power‑on.
126.10 No line frequency was detected.
126.11 Line frequency has gone outside the operating
range.
126.12 LVPS mismatch was detected.
126.13 LVPS mismatch was detected.
LVPS service check
Note: Make sure that the voltage output of the electrical outlet matches the voltage rating of the printer.
"Power supply removal" on
"Power supply removal" on
"Fuser error service check" on
Diagnostics and troubleshooting
135
Yes
Go to step 6.
Go to step 6.
Contact the next
level of support.
Action
See "LVPS service check" on page
See "LVPS mismatch service check" on
page 137.
7018
No
Go to step 5.
The problem is
solved.
The problem is
solved.
135.