Maintenance
Inspection guide
The purpose of this inspection guide is to aid you in identifying the intervals, based on page count, at which
parts must be inspected (for visible physical damage), cleaned, or replaced.
If any unsafe conditions exist, find out how serious the hazard could be and if you can continue before you
correct the hazard.
As you service the machine, check for the following:
•
Damaged, missing, or altered parts, especially in the area of the On/Off switch and the power supply
•
Damaged, missing, or altered covers, especially in the area of the top cover and the power supply cover
•
Possible safety exposure from any non-Lexmark attachments
Use the following table to determine when specified parts should be inspected:
PART
Fuser
MPF pick roller and separator pad
Pick tires
Separator roller assembly
Transfer roller
Scheduled maintenance
The control panel displays an 80.xy error when it reaches 200K page counts. It is necessary to install the
appropriate maintenance kit to maintain the print quality and reliability of the printer. Reset the maintenance
counter after replacing the maintenance kit.
Maintenance kits
Part number and kit
41X1227—Maintenance Kit (100 V)
41X1225—Maintenance Kit (110 V)
EVERY SERVICE CALL
Inspect
Inspect
Inspect
Inspect
Inspect
Contents
•
41X1180—Fuser (100 V)
•
41X1197—MPF pick roller and separator pad
•
41X1198—Pick tires
•
41X1212—Separator roller assembly
•
40X8393—Transfer roller
•
41X1178—Fuser (110 V)
•
41X1197—MPF pick roller and separator pad
•
41X1198—Pick tires
•
41X1212—Separator roller assembly
•
40X8393—Transfer roller
Maintenance
381
7018
EVERY 200K
Replace
Replace
Replace
Replace
Replace