Table of Contents
Advertisement
Use printer menus
Menu item
Banner Page
Off*
On
Scan to PC Port Range
Enable Network Connections
Enable*
Disable
Enable LLDP
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Wireless
Menu item
Setup On Printer Panel
Choose Network
Add Wi‑Fi Network
•
Network Name
•
Network Mode
Infrastructure
•
Wireless Security Mode
Disabled*
WEP
WPA2/WPA - Personal
WPA2 - Personal
Wi‑Fi Protected Setup
Start Push Button Method
Start PIN Method
Compatibility
802.11b/g/n (2.4GHz)
802.11a/b/g/n/ac (2.4GHz/5GHz)*
802.11a/n/ac (5GHz)
Description
Print a banner page.
Specify a valid port range for printers that are behind a port blocking firewall.
Enable or disable all network connections.
Enable Link Layer Discovery Protocol (LLDP) in the printer.
Description
Determine the wireless network that the printer connects to.
Note: This menu item appears as Wireless Connection Setup in the
Embedded Web Server.
Establish a wireless network and enable network security.
Notes:
•
Start Push Button Method connects the printer to a wireless
network when buttons on both the printer and the access point
(wireless router) are pressed within a given time.
•
Start PIN Method connects the printer to a wireless network
when a PIN on the printer is entered into the wireless settings
of the access point.
Specify the wireless standard for the wireless network.
100
Advertisement
Table of Contents
