Lexmark MX-B427W User Manual page 67

Digital multifunctional system
Table of Contents

Advertisement

Use printer menus
Menu item
Supplies
Cartridge Alarm
Off*
Single
Continuous
E‑mail Alerts Setup
E‑mail Setup
Primary SMTP Gateway
Primary SMTP Gateway Port (25*)
Secondary SMTP Gateway
Secondary SMTP Gateway Port (25*)
SMTP Timeout (30 seconds*)
Reply Address
Always use SMTP default Reply
Address(Off*)
Use SSL/TLS(Disabled*)
Require Trusted Certificate(On*)
SMTP Server Authentication(No
authentication required*)
Device‑Initiated E‑mail(None*)
Device Userid
Device Password
NTLM Domain
Disable "SMTP server not set up" error(Off*)
Error Prevention
Jam Assist
Off
On*
Error Prevention
Auto Continue
Disabled
Enabled* (5 seconds)
Auto Continue Time
Error Prevention
Auto Reboot
Auto Reboot (Reboot always*)
Error Prevention
Auto Reboot
Max Auto Reboots (2*)
Error Prevention
Auto Reboot
Auto Reboot Window (720*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the number of times that the alarm sounds when the
cartridge is low.
Configure the e‑mail settings of the printer.
Set the printer to check for jammed paper automatically.
Let the printer continue processing or printing a job
automatically after clearing certain attendance conditions.
Set the printer to restart when an error occurs.
Set the number of automatic reboots that the printer can
perform.
Set the number of seconds before the printer performs an
automatic reboot.
67

Advertisement

Table of Contents
loading

Table of Contents