How To Read The Display - Canon MK5000 Basic Operation Manual

How to Read the Display

1
Prev
Caps Lock
1
2
Insert/Overwrite mode
(MK5000 only)
3
Printing speed
4
Half cut setting
5
Remaining ribbon
14
2 3 4 5
Print Speed Remaining Ink Ribbon
Caps INS Half Cut PWR
1000
H / H
Page Next A/ Frame Char Size
16 15 14
Indicates whether the Caps Lock mode is active.
: Active, so all alphabetic characters are entered in uppercase.
(No indication) : Normal (inactive).
Indicates which of the two input modes is selected:
: Insert mode
(No indication) : Overwrite mode
Displays the printing speed settings.
H: High M: Middle (MK5000 only) L: Low
The settings for adding a half cut to tubes or label tapes are indicated
by the following symbols.
: Half cut.
: Not half cut, but a solid line is printed showing where to cut
with scissors, etc.
: Not half cut, but a dotted line is printed showing where to cut
with scissors, etc.
(No indication) : Not half cut, and no cutting line is printed.
Indicates the remaining capacity of the ink ribbon with a mark.
(Ribbon remaining)
.
.
.
(Out of ribbon)
(Not displayed)
6 7 8
Warmer Seg Length Align
8 . 0 C
3mm 1 N 1
Cont Print
#Line Char Space
13 12
11 10
: The display changes every 10%. When the
remaining capacity is low, prepare a new
ribbon cassette.
: The ribbon cassette is not loaded, or the
information cannot be read.
9