Table of Contents
Advertisement
6
Power
7
Warmer
8
Cut Length/Alignment/
Margin
9
Cursor
10
Cont Print
11
Character Space
Lines
12
The power source being used is indicated by the following symbols.
(Power remaining)
.
.
.
(Out of power)
Displays the settings for the (optional) tube warmer.
Auto
: Only warms the tube during printing. When printing
is executed, the tube will be warmed up to the set
temperature, and then printing will start.
RDY
: Warms the tube except while printing. When printing
is executed, it starts printing immediately. "WAI" will
be displayed when the set temperature is adjusted.
OFF
: Disables the tube warmer settings.
(No indication) : The tube warmer is not set.
Displays the settings for the length (cut length) of a tube (or a label),
alignment, and margin of the current page.
• When using the "Automatic" cut length feature (The set value is
highlighted�)
Cut Length (mm) Alignment (Centered "C" )
1 5 . 0 C
• When using the "Specify" cut length feature
(Even Distribution and Plate Printing Area are MK5000 only)
Cut Length (mm) Alignment (Centered "C", Left-aligned "L" ,
4 0 . 0 L 5
Text is entered at the position indicated by a
Displays the number of times the current page will be printed
repeatedly.
Displays the character space setting for the current page.
Displays the number of lines setting for the current page.
: The AC adapter is being used.
: When the battery is being used, the remaining
battery charge is indicated by this symbol.
(If the battery is not sufficiently charged, the
remaining capacity may not be displayed
correctly.)
Right-aligned "R" , Even Distribution "E" )
Margin (mm)
( "E" when "Expansion" is selected on the Plate Printing Area)
.
How to Read the Display
15
Advertisement
Table of Contents
