Table of Contents
Advertisement
2. Loading the Print Media
■
When Using a Tube or Plate
IMPORTANT
• You cannot print on dirty tubes or plates. Wipe off
any dirt or dust with a dry cloth. Also, do not use
tubes or plates that have oil or other stains that
cannot be wiped off.
NOTE
• Please purchase commercially available tubes and
plates for use. For more information on the sizes
that can be used, refer to
• Only the MK5000 supports printing on plates.
1
Prepare the attachment�
For tubes (round)
Use the cleaner (blue) by attaching it to the
tube attachment.
For flat tubes
Use the cleaner (blue) by attaching it to the
(optional) plate and flat tube attachment.
20
"Print Media
(P�48)".
For plates
Use the plate cleaner (gray) by attaching it to
the (optional) plate and flat tube attachment.
2
Install the tube attachment into the
printer�
Align the attachment with the slot on the
printer and push it in firmly until it clicks into
place.
3
Set the size switch lever to match the
size of the tube (or the plate size)�
For plates, set it to "ø2.6mm~ø10.0mm. "
Advertisement
Table of Contents
