Laser Pointer Arm Command >Lm,Lp,X*<Cs><Cr - Safran LRF 6742 Manual

LRF 6742 Integrator Manual
8.6.5 Laser Pointer Arm Command >LM,Lp,x*<CS><CR>
This command serves as the software interlock for the laser pointer functionality.
It must be activated for allowing the laser pointer emission.
Laser pointer lock command and response
Command
Inputs
>LM,Lp,x*<CS><CR>
>LM,Lp,1*DE<0D>
>LM,Lp,0*DD<0D>
Response
Outputs
Examples of a laser pointer command transaction:
Host  LRF Module
Command frame:
LRF Module  Host
Acknowledge frame:
Prompt:
Host  LRF Module
Command frame:
LRF Module  Host
Acknowledge frame:
Prompt:
WARNING
Laser pointer emission is now active.
It remains active until:
- it is switched off via software command
- or if the power supply is disconnected.
Host  LRF Module
Command frame:
LRF Module  Host
Acknowledge frame:
Prompt:
Host  LRF Module
Command frame:
LRF Module  Host
Acknowledge frame:
Prompt:
INTEGRATOR MANUAL LRF 6742 918574A
Confidential & Proprietary  SAFRAN VECTRONIX AG – All rights reserved
Description
Laser pointer arm request with parameter x.
Example to arm.
Example to disarm.
Description
No response expected.
Table 7: Laser pointer arm command
>LM,Lp,1*DE<0D>
>AC*84<0D>
<
>LM,Rp,1*E4<0D>
>AC*84<0D>
<
>LM,Rp,0*E3<0D>
>AC*84<0D>
<
>LM,Lp,0*DD<0D>
>AC*84<0D>
<
Public: 04.2023
Page: 36/63