Storing Units - A&D FZ-i WP Series Instruction Manual

5.2.

Storing Units

The units or modes can be selected and stored in the function table. The sequence of displaying the
units or modes can be arranged in the function table so as to fit the frequency of use.
Select a unit or mode and arrange the sequence of display as
follows:
1 Press and hold the SAMPLE key until ba5fnc of the
function table is displayed.
2 Press the SAMPLE key several times
1Unit .
3 Press the PRINT key to enter the unit selection mode.
4 Specify a unit or mode in the order to be displayed
using the following keys.
SAMPLE key
RE-ZERO key
5 Press the PRINT key to store the units or modes. The
balance displays end and then displays the next menu
item of the function table.
6 Press the CAL key to exit the function table. Then the
balance returns to the weighing mode with the unit
specified first in step 4.
Notes
When the power is turned on, the scale displays the unit
specified first in step 4.
In the weighing mode, to select a unit or mode for weighing,
press the MODE key.
to
To sequentially display the units.
To specify a unit or mode. The
stabilization indicator
when the displayed unit or mode
is specified.
16
display
Displays the units
sequentially.
appears
Select
Specify
Store