A&D FZ-i WP Series Instruction Manual page 54

2 Press the SAMPLE key several times to display Cp fnc .
3 Press the PRINT key.
4 Press the RE-ZERO key several times to display Cp 3 .
5 Press the PRINT key to store the selected mode.
Entering the upper limit value
6 With Cp Hi displayed, press the PRINT key. The current setting of the upper limit value is
displayed with all the digits blinking.
 When the current setting is not to be changed, press the PRINT or CAL key to go to step 7.
 When the current setting is to be changed, press the RE-ZERO key. Change the setting
using the following keys.
SAMPLE key
RE-ZERO key
MODE key
PRINT key
CAL key
Entering the lower limit value
7 With Cp lo displayed, press the PRINT key. The current setting of the lower limit value is
displayed with all the digits blinking.
 When the current setting is not to be changed, press the PRINT or CAL key to go to step 8.
 When the current setting is to be changed, press the RE-ZERO key. Change the setting
using the following keys.
SAMPLE key
RE-ZERO key
MODE key
PRINT key
CAL key
8 Press the CAL key to exit the comparator function and return to the weighing mode.
To select the digit to change the value. The selected digit blinks.
To change the value of the digit selected.
To switch the polarity.
To store the new setting and go to step 7.
To cancel the new setting and go to step 7.
To select the digit to change the value. The selected digit blinks.
To change the value of the digit selected.
To switch the polarity.
To store the new setting and go to step 8.
To cancel the new setting and go to step 8.
54