Maintenance; Care - A&D FZ-i WP Series Instruction Manual

19.1. Care

Cleaning the balance
Do not use organic solvents or chemically treated cloth to clean the balance.
Balance main unit
Breeze break
Weighing pan
Do not disassemble the balance.
Use the original packing material for transportation.
Specifications of the FZ-iWP/FX-iWP series
In normal use, the balance can be cleaned with water. But, keep the following precautions so that
dust and water do not invade the balance.
Do not direct water pressure at the bottom of the balance.
Do not use powerful water jets.
Do not immerse the balance in water.
While cleaning the balance and keeping it waterproof, cover the RS-232C interface connector
using the terminal cover or connect the waterproof RS-232C cable (AX-KO2737-500), and cover
the AC adapter jack. Also, insure that the underhook cap is in place.
If water accumulates on the waterproof diaphragm, a weight value may be difficult to become
stable. Clean the diaphragm while taking much care not to deform it.

19. MAINTENANCE

When cleaning the balance main unit, wipe it using a lint free soft cloth
dampened with a mild detergent.
An anti-static treatment has been applied to the breeze break components.
Wipe them with dry and a lint free soft cloth. Wiping them using a cloth
dampened with water or a mild detergent repeatedly or washing them
using water may cause the anti-static treatment performance to decrease.
When cleaning the weighing pan, handle it carefully so that your fingers
are not injured by the edges.
78
AC adapter jack
When the AC adapter is not connected, cover
the jack.
RS-232C interface
Cover the interface connector or connect the
waterproof RS-232C cable (AX-KO2737-500).