Storing Weighing Units - A&D EJ-123 Instruction Manual

8.4.

Storing Weighing Units

It is possible to store the weighing units that will actually be used from the units
available. For the units available, see "5.3. Units".
Select and store the weighing units as described below:
1. Press and hold the SAMPLE key to display func
2. Press the SAMPLE key to display Unit
3. Press the PRINT key.
4. Press the SAMPLE key to display a weighing unit to
be stored.
5. Press the RE-ZERO key to select the weighing unit. The
selected weighing unit is shown with the STABLE indicator.
At this stage, the weighing unit is not stored in memory.
6. Repeat steps 4. and 5. to store all weighing units to be used.
7. Press the PRINT key to store the selected weighing
units in memory. id
8. Press the UNITS key to turn off the balance.
Note
When the balance is switched ON, it starts with the unit that
was stored first at step 5.
Each pressing switches the units available
is displayed after end
20
.
func
.
Unit
Unit
in the order described on "5.3.Units".
Unit
end
.
id
The balance is turned off.
Press and hold
To select
To store