A&D FZ-i WP Series Instruction Manual page 64

How To Input The Password At The Start Of Weighing
pa55 1
(Request password input at the start of weighing)
1. Press the ON:OFF key while the display off.
2. After display PA55
----
display
PW
3. Input 4 digits password using the following keys.
The balance will turn automatically after no operation for
ten minutes.
MODE key ............. Character
SAMPLE key .......... Character
PRINT key ............. Character
RE-ZERO key ........ Character
CAL key ................. Back key
4. If the password is correct, the login level will be
displayed, the weighing will be displayed after all
lamps are illuminated. After entering the
administrator's password, log in as an
administrator.
(At factory settings, the password is set to
2222
by RE-ZERO key input 4 times at the
administrator level.)
If the password is incorrect, the buzzer
sounds 3 times, FAiL will display and the
display will turn off.
pa55 2
(To change the setting, login is required with the administrator's password)
When logged in as a guest (GUE
1. Press the ON:OFF key while the display off.
LoG
2. After
In , GUE ST
, it becomes password input
.
m
5
P
2
St
)
displayed, return to the weighing display.
Input 4 times
Password
m5p2
Login level display
LoG
01
In ,U5Er
Weighing display
Weighing display
64
U5Er
PA55
---- PW
PW No key operation
for 10 minutes
Password is incorrect
fAIL
Display off
LoG
In , GUE ST