Storing Weighing Units - A&D EK-300EP Instruction Manual

10-4. Storing Weighing Units

It is possible to store the weighing units that will actually be used from the units
available. For the units available, Refer to "7-3. Units."
Select and store the weighing units as described below:
1. Press and hold the SAMPLE key to display
func
.
2. Press the SAMPLE key several times to display
Unit .
3. Press the ENTER key.
4. Press the SAMPLE key to select a weighing
unit.
5. Press the TARE key to confirm the weighing
unit.
6. Repeat steps 4 and 5 to confirm all the weighing
units to be used.
7. Press the ENTER key to store the confirmed
weighing units in memory.
func
8. Press the
weighing mode.
 Note
When the balance is turned ON, it starts
with the unit that was confirmed first in
step 5.
appears after end
MODE key to return to the
.
23
Press and hold
func
Press
several times
Unit
Unit
Each pressing switches
the units available in the
order described in 7-3.
Unit
To confirm
To store
end
func
Returns to
the weighing mode