Storing Weighing Units - A&D EK-15KL Instruction Manual

8-4. Storing weighing units

It is possible to store the weighing units that will be actually used from the units
available. For the units available, see "5-2. Weighing units."
Select and store the weighing units as described below:
1. With the power turned OFF, press and hold the
RE-ZERO key and press the ON/OFF key to turn
the power ON and enter the function setting mode.
func
appears.
2. Press the MODE key several times to display
Unit
.
3. Press the PRINT key.
4. Press the MODE key to change a weighing unit.
5. Press the RE-ZERO key to select the weighing unit.
The STABLE indicator turns on when the weighing unit
has been selected.
6. Repeat Steps 4 and 5 to select all weighing units to be
used.
7. Press the PRINT key to store the units.
id
appears after
8. Press the ON/OFF key to turn the power OFF or
press the RE-ZERO key.
 When the scale is turned ON, it starts with the
weighing unit that was selected first in Step 5.
end .
23
Press several times
Switches weighing units
To select
STABLE indicator
To store