A&D FZ-i WP Series Instruction Manual page 49

5if type 2
KF format
This is the Karl-Fischer moisture meter format and is used when the peripheral equipment can only
communicate using this format.
 This format consists of fourteen characters excluding the terminator.
 This format has no header characters.
 The polarity sign is placed before the data, with spaces in place of leading zeros, if the data is
not zero or overloaded.
 This format outputs the unit only for a stable value.
+ 1 2 . 7 8
Data
5if type 3
MT format
This format is used when the peripheral equipment of other manufacturer is connected. Please note
that the connection is not guaranteed.
 A header of two characters indicates the balance condition.
 The polarity sign is used only for negative data.
 The weight data uses spaces in place of the leading zeros.
 The character length of this format changes dependent upon the unit
S
Header Data
Stable header (outputs by the command)
S
Unstable header (outputs by the command)
S D
Overload header
S I
NU (numerical) format
This format outputs only numerical data.
 This format consists of nine characters excluding the terminator.
 The polarity sign is placed before the data with the leading zeros. If the data is zero, the plus sign
is used.
5if type 5
CSV format
 Separates the data of A&D standard format and the unit by a comma (,).
 Outputs the unit even when the data is overloaded.
g
Unit
C R L F
1 2 . 7 8 g
Unit Terminator
5if type 4
C R L F
Terminator
Stable (outputs by the PRINT key)
Unstable (outputs by the PRINT key)
49