Installing A Lan Module - Nexcom NSA 7146 User Manual

Chapter 3: System Setup

Installing a LAN Module

Please correctly follow the below instructions and noted items
to avoid making unnecessary damages. Make sure the power
supply is switched off and disconnected from the power sources
CAUTION! CAUTION! CAUTION!
before replacing or adding LAN modules to prevent electric
shock or system damage.
1. Remove the screw on the LAN module then put them in a safe place for
later use.
Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
2. Use the handle provided, and insert the handle into the two holes on the
LAN module.
Insert here
19
Handle
NSA 7146 User Manual