Nexcom NSA 7146 User Manual page 89

Chapter 4: BIOS Setup
System Event Log
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Main Advanced Platform Configuration
Enabling/Disabling Options
SEL Components [Enabled]
Erasing Settings
Erase SEL [No]
When SEL is Full [Do Nothing]
Custom EFI Logging Options
Log EFI Status Codes [Error code]
NOTE: All values changed here do not take
effect until computer is restarted.
Version 2.20.1275. Copyright (C) 2019 American Megatrends, Inc.
SEL Components
Enables or disables event logging for error/progress codes during boot.
Erase SEL
Configures the options for erasing SEL.
When SEL is Full
Configures the action to perform when SEL is full.
Log EFI Status Codes
Configures the options for logging EFI status codes.
Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
Socket Configuration Server Mgmt
Change this to enable or disable
event logging for error/progress
codes during boot.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
BMC Network Configuration
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Main Advanced Platform Configuration
--BMC network configuration--
**********************
Configure IPV4 support
**********************
Lan channel 1
Configuration Address
Current Configuration
Station IP address
Subnet mask
Station MAC address
Router IP address
Router MAC address
Lan channel 2
Configuration Address
Current Configuration
Station IP address
Version 2.20.1275. Copyright (C) 2019 American Megatrends, Inc.
Configuration Address
Select to configure LAN channel parameters statically or dynamically (by BIOS
or BMC). Unspecified option will not modify any BMC network parameters
during BIOS phase.
75
Socket Configuration Server Mgmt
▲
Select to configure LAN
channel parameters statically
or dynamically(by BIOS or
BMC). Unspecified option will
not modify any BMC network
parameters during BIOS phase
[Unspecified]
DynamicAddressBmcDhcp
0.0.0.0
0.0.0.0
00-50-20-75-23-01
0.0.0.0
00-00-00-00-00-00
→←: Select Screen
↑↓: Select Item
Enter: Select
[Unspecified]
+/-: Change Opt.
F1: General Help
DynamicAddressBmcDhcp
F2: Previous Values
0.0.0.0
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
▼
NSA 7146 User Manual