Supermicro B13SEG Owner's Manual page 92

Super B13SEG User's Manual
iSCSI Configuration
iSCSI General Parameters
Boot to Target
Use this feature to enable or disable booting to the iSCSI target after connection. One
Time Disabled disables iSCSI boot for the next boot, after which it is enabled. The op-
tions are Disabled, Enabled, and One Time Disabled.
TCP/IP Parameters via DHCP
Use this feature to acquire TCP/IP configuration by DHCP. The options are Disabled
and Enabled.
iSCSI Parameters via DHCP
Use this feature to acquire iSCSI parameters by DHCP. The options are Disabled and
Enabled.
CHAP Authentication
Use this feature to enable or disable Challenge-Handshake Authentication Protocol
(CHAP) authentication. The options are Disabled and Enabled.
CHAP Mutual Authentication (Available when "CHAP Authentication" is set to
Enabled)
Use this feature to set the CHAP ID and CHAP Secret the iSCSI Initiator Parameters
menu. The options are Disabled and Enabled.
IP Version
This feature displays whether IPv4 or IPv6 will be used for iSCSI initiator and targets.
iSCSI Initiator Parameters
Use this feature to view or configure iSCSI initiator parameters. The following items are
displayed:
•
IP Address
•
Subnet Mask
•
Default Gateway
•
Primary DNS
92