Supermicro B13SEG Owner's Manual page 91

Chapter 4: UEFI BIOS
NIC Configuration
Banner Message Timeout
Use this feature to specify the number of seconds that the Option ROM banner is displayed
during POST. The default setting is 4.
Legacy Boot Protocol
Use this feature to select a non-UEFI Boot Protocol. The options are None, PXE, iSCSI,
PXE without fail-over, and iSCSI without failover.
IPv4/IPv6
Use this feature to select whether IPv4, IPv6, or both will be used for iSCSI initiator and
targets. The options are IPv4, IPv6, and IPv4/IPv6.
Virtual LAN Mode
Use this feature to configure virtual LAN mode. The options are Disabled and Enabled.
Virtual LAN ID (Available when "Virtual LAN Mode" is set to Enabled)
Use this feature to configure the virtual LAN ID. This feature accepts a number ranging
from 1 to 4094. The default setting is 1.
Boot Retry Count
Use this feature to set the number of boot retries. The options are No Retry, 1 Retry, 2
Retries, 3 Retries, 4 Retries, 5 Retries, 6 Retries, and Indefinite Retries.
Boot Strap Type
Use this feature to select the boot strap type. The options are Auto Detect, BBS, Int 18h,
and Int 19h.
Wake On LAN
Use this feature to enable or disable Wake On LAN. The options are Disabled and Enabled.
Wake On LAN Link Speed
Use this feature to select the port speed used for Wake on LAN. The default setting is
1Gbps.
91