Supermicro B13SEG Owner's Manual page 90

Super B13SEG User's Manual
Select IPv4 or IPv6 (Available when "Instance of Priority 1" is greater than 0)
This feature specifies which connection the target LAN port should boot from. The options
are IPv4 and IPv6.
Boot Description (Available when "Instance of Priority 1" is greater than 0)
Use this feature to enter a boot description. The boot description cannot be longer than 75
characters. Be sure to enter a boot description, otherwise the boot option for the URI cannot
be created.
Boot URI (Available when "Instance of Priority 1" is greater than 0)
Enter a Boot Uniform Research Identifier (URI). The boot URI cannot be longer than 128
characters. This Boot URI determines how IPv4 Boot Option and IPv6 Boot Option will be
created. This feature is only supported on Dual or EFI Boot Mode.
Instance of Priority 2
This feature sets the rank target port. The default setting is 0.
Select IPv4 or IPv6 (Available when "Instance of Priority 2" is greater than 0)
This feature specifies which connection the target LAN port should boot from. The options
are IPv4 and IPv6.
Boot Description (Available when "Instance of Priority 2" is greater than 0)
Use this feature to enter a boot description. The boot description cannot be longer than 75
characters. Be sure to enter a boot description, otherwise the boot option for the URI cannot
be created.
Boot URI (Available when "Instance of Priority 2" is greater than 0)
Enter a Boot Uniform Research Identifier (URI). The boot URI cannot be longer than 128
characters. This Boot URI determines how IPv4 Boot Option and IPv6 Boot Option will be
created. This feature is only supported on Dual or EFI Boot Mode.
Mellanox Network Adapter - XX:XX:XX:XX:XX:XX

Firmware Image Properties
This feature displays information about the Ethernet controller. The following information
is displayed:
•
Family Firmware Version
•
EFI Version
90