Supermicro B13SEG Owner's Manual page 3

About This Manual
This manual is written for system integrators, IT technicians and knowledgeable end users.
It provides information for the installation and use of the B13SEG motherboard.
About This Motherboard
The Supermicro B13SEG motherboard supports a 4th Generation Intel® Xeon® Scalable
Processor in an LGA4677 socket with up to 270 W on air cooling and 350 W on liquid cooling.
Built with the Intel PCH C741 chipset, this motherboard features up to 2 TB of DDR5
ECC RDIMM/RDIMM 3DS memory with speeds of up to 4800 MT/s in eight memory slots,
two M.2 M-Key PCIe 5.0 connectors, one PCIe 5.0 x16 mezzanine card connector, four PCIe
5.0 x8 MCIO connectors, and an onboard Trusted Platform Module (TPM) header. B13SEG is
a high-density blade sever motherboard optimized for 8U SuperBlade architectures. B13SEG
supports various data network interfaces such as 25 GbE, Infiniband 100 GbE/EDR, and 200
GbE/HDR. Note that this motherboard is intended to be installed and serviced by professional
technicians only. For processor and memory updates, refer to our website at
supermicro.com/products/.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and to prevent
damage done to the components or injury to yourself:
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.
Warning! Indicates high voltage may be encountered while performing a procedure.
Important: Important information given to ensure proper system installation or to
relay safety precautions.
Note: Additional Information given to differentiate various models or to provide in-
formation for proper system setup.
Preface
3
Preface
http://www.