Page 2
Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual at any time and without notice. This product, including software, if any, and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or machine without prior written consent.
Chapter 1 Safety Guidelines ESD Safety Guidelines ................... 1-1 General Safety Guidelines ................1-1 A Note to Users ....................1-2 Introduction to the BPN-NVMe3-216N-S4 Backplane ........1-2 Chapter 2 Connectors and Jumpers Front Connectors .................... 2-1 2-2 Front Connector and Pin Definitions ............... 2-2 Front Jumpers ....................
For faster service, RMA authorizations may be requested online (http://www.super- micro.com/support/rma/). Whenever possible, repack the backplane in the original Supermicro box, using the original packaging materials. If these are no longer available, be sure to pack the backplane in an anti-static bag and inside the box. Make sure that there is enough packaging material surrounding the backplane so that it does not become damaged during shipping.
Chapter 1 Safety Guidelines Chapter 1 Safety Guidelines To avoid personal injury and property damage, carefully follow all the safety steps listed below when accessing your system or handling the components. ESD Safety Guidelines Electrostatic Discharge (ESD) can damage electronic com ponents. To prevent dam- age to your system, it is important to handle it very carefully.
Introduction to the BPN-NVMe3-216N-S4 Backplane The BPN-NVMe3-216N-S4 backplane has been designed to utilize the most up-to-date technology available, providing your system with reliable, high-quality performance. Always refer to the Supermicro web site at www.supermicro.com for the latest updates, compatible parts, and supported configurations.
BPN-NVMe3-216N-S4 Backplane Manual 2-2 Front Connector and Pin Definitions #1. - 12. NVMe Ports The NVMe ports, designated CN1 through CN24, are used to connect the OCuLink cables. They correspond to drives DRV#0 through DRV#23. (See page 2-4 for drive locations.) #13. Backplane Main Power Connectors...
Chapter 2 Connectors and Jumpers Front Jumpers ACTLED Figure 2-2. Front Jumpers Explanation of Jumpers Connector To modify the operation of the backplane, Pins jumpers can be used to choose between optional settings. Jumpers create shorts between two pins to change the function Jumper of the connector. Pin 1 is identified with a square solder pad on the printed circuit...
BPN-NVMe3-216N-S4 Backplane Manual Rear Components, Connectors, and LED Indicators Figure 2-3. Rear SAS/SATA Connectors and LED Indicators SAS/SATA/NVMe Connectors and LED Indicators Rear SAS Drive Failure Activity Connector Number DRV#0 NVMe HDD #0 LED1 DRV#1 NVMe HDD #1 LED2 DRV#2...
Page 14
BPN-NVMe3-216N-S4 Backplane Manual Disclaimer (cont.) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency com- munication devices, or other critical systems whose failure to perform be reasonably expected to result in significant injury or loss of life or catastrophic property damage. Accordingly, Supermicro...
Need help?
Do you have a question about the BPN-NVMe3-216N-S4 and is the answer not in the manual?
Questions and answers