Supermicro B13SEG Owner's Manual page 101

Chapter 4: UEFI BIOS
Station MAC Address
Gateway IP Address
This feature displays the Gateway IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 172.29.0.1).
VLAN
This feature displays the status of VLAN support. The options are Disable and Enable.
*******************************
Configure IPv6 Support
*******************************
IPv6 Address Status
This feature displays the status of the IPv6 address.
IPv6 Support
Use this feature to enable IPv6 support. The options are Enabled and Disabled.
Configuration Address Source (Available when "IPv6 Support" is set to Enabled)
Use this feature to select the source of the IPv6 connection. If Static Configuration is selected,
you will need to know the IP address of IPv6 connection and enter it to the system manually
in the field. If the Dynamic Host Configuration Protocol (DHCP) related option is selected,
the BIOS will search for a DHCP server in the network that is attached to and request the
next available IP address for this computer. The options are Static Configuration, DHCPv6
Stateless, and DHCPv6 Stateful.
IPv6 Address (DHCPv6 Stateless) (Available when "Configuration Address Source"
is set to Static Configuration)
This feature displays the station IPv6 address. Press <Enter> to change the setting.
Prefix Length (Available when "Configuration Address Source" is set to Static
Configuration)
This feature displays the prefix length. Press <Enter> to change the setting.
Gateway IP (Available when "Configuration Address Source" is set to Static
Configuration)
Use this feature to enter the IPv6 gateway IP address. Press <Enter> to change the setting.
Advanced Settings
This feature allows you to automatically obtain the DNS server IP or manually obtain the DNS
server IP. The options are Auto obtain DNS server IP and Manually obtain DNS server IP.
101