Page 2
Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual at any time and without notice. This product, including software, if any, and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or machine without prior written consent.
This manual reflects BPN-SAS3-116A-N10, Revision 1.20, the most current release available at the time of publication. Refer to the Supermicro website at www.supermicro.com for the latest updates, compatible parts and supported configurations.
Page 6
BPN-SAS3-116A-N10 Backplane Manual 2-2 Rear Connector Definitions 1. Power Connectors 4-Pin Power Connector (JPW3) These 4-pin connectors are designated Pin# Definition JPW1, JPW2, JPW3 and JPW4. They 1, 2 Ground provide power to the backplane. +12V 2. Sideband Connector This is the sideband connector for SAS3 Sideband Connector and is designated SGPIO J10.
BPN-SAS3-116A-N10 Backplane Manual Front Connectors and LED Indicators Connectors for NVMe SSD drive numbers #0 through #5 are dedicated NVMe SSD drives only. SAS #0 - SAS #3 are hybrid ports that support SAS3, SATA or NVMe. LED11 LED15 LED17...
Page 8
BPN-SAS3-116A-N10 Backplane Manual Disclaimer (cont.) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in significant injury or loss of life or catastrophic property damage. Accordingly, Supermicro...
Need help?
Do you have a question about the BPN-SAS3-116A-N10 and is the answer not in the manual?
Questions and answers