Supermicro B13SEG Owner's Manual page 122

Super B13SEG User's Manual
D.3 Recovering the BIOS Block with a USB Device
This feature allows you to recover the main BIOS image using a USB-attached device without
additional utilities used. A USB flash or media drive can be used for this purpose. However,
a USB solid-state drive cannot be used for BIOS recovery at this time.
The file system supported by the recovery block is FAT (including FAT12, FAT16, and FAT32),
which is installed on a bootable or non-bootable USB-attached device. However, the BIOS
might need several minutes to locate the SUPER.ROM file if the media size becomes too
large due to the huge volumes of folders and files stored in the device.
To perform UEFI BIOS recovery using a USB-attached device, follow the instructions below:
1. Using a different machine, copy the "Super.ROM" binary image file into the disc Root "\"
directory of a USB flash or media drive.
Note 1: If you cannot locate the "Super.ROM" file in your driver disk, visit our website
at www.supermicro.com
age into a USB flash device and rename it "Super.ROM" for the BIOS recovery use.
Note 2: Before recovering the main BIOS image, confirm that the "Super.ROM" bi-
nary image file you download is the same version or a close version meant for your
motherboard.
2. Insert the USB device that contains the new BIOS image ("Super.ROM") into your USB
port and reset the system until the following screen appears:
to download the BIOS package. Extract the BIOS binary im-
122