Table of Contents
Advertisement
User Manual
H3C XE 200/2000 IP PBX G-Remote
Table 2-2 Display the user information list
Display the user
information list
2.2.3 Clearing the User Information List
Clear the user information list as follows:
Table 2-3 Clear the user information list
Enter system view
Enter GUI server configuration view
Clear the user information list
Caution:
This command restores the user information list to the initial state, that is, only the
default account is contained.
If the GUI server has been started, you need to shut it down first.
Use this command carefully to avoid the loss of important information.
2.2.4 Web Service
The XE IP PBX provides the Web service, helping you to access the XE IP PBX
through the Web browser and download the GUI client software.
After you enable the Web service, you can visit http://xxx.xxx.xxx.xxx/filename to view
the corresponding file under the directory flash:/web on the XE IP PBX. By default, you
will directly access the index.html file under this directory when you visit
http://xxx.xxx.xxx.xxx. That is, visiting http://xxx.xxx.xxx.xxx is the same as visiting
http://xxx.xxx.xxx.xxx/index.html.
Operation
display gui-user { all |
online }
Operation
Chapter 2 GUI Server Configuration
Command
Command
system-view
gui
reset-ual
2-2
Remarks
Required. Keyword all is
to display information of
all administrators and
online is to display
information of current
login administrators.
Remarks
—
—
Required
Advertisement
Table of Contents
