Table of Contents
Advertisement
User Manual
H3C XE 200/2000 IP PBX G-Remote
5.13.2 Configuring Time Limit Call Service
Table 5-20 Configure the time limit call service
Step
1
2
—
—
Return to
5.14 Third Party Call Control Service
5.14.1 Introduction to Third Party Call Control Service
A third party, usually an administrator that has the corresponding authority, can preset a
call task on the XE IP PBX. The XE IP PBX will then invite the call participants (A and B)
to join the call at the preset time and to have a conversation. Two participants, namely,
parties A and B, are supported by the third party call control service.
Configuration
task
Select [System View/Location
Server/Gateway/the gateway where the
subscriber to be configured is
located/Subscriber/the subscriber to be
configured] in the navigation tree, and
Enable/disable
Select [Call With Time Limit] in the
the time limit
configuration window to enable the time
call service for
limit call service for the subscriber.
a subscriber
Clear this check box to disable the time
limit call service for the subscriber.
Command: srv-switch limited-time-call
(subscriber number view)
1)
Configure the
time limit of the
2)
limited calls
Command: limited-call-time (time limit call
service view)
1)
Configure the
2)
default time
limit of limited
calls
Command: default-limit-call-time (LS view)
Configure
other call
Refer to
services
XE IP PBX Configuration
Chapter 5 Call Service Configuration
Description
Select
[System
Server/Gateway/the gateway where the
subscriber
to
be
located/Subscriber/the subscriber to be
configured] in the navigation tree.
Set the time limit in the [The Max Time
Of Limited Call] text box in the
configuration window.
Select [System View/Location Server] in
the navigation tree.
Set the default time limit in the [Default
Time Of Limited Call] text box in the
configuration window.
Call Service
Overview.
Overview.
5-26
Remarks
Required
View/Location
configured
is
Required
Optional
Optional
Advertisement
Table of Contents
