Table of Contents
Advertisement
User Manual
H3C XE 200/2000 IP PBX G-Remote
Step
2
—
Return to
5.5 Outgoing Call Authority Control Service
5.5.1 Introduction to Outgoing Call Authority Control Service
By defining subscriber roles, the outgoing call authority control service decides
subscribers' rights to make outgoing calls.
5.5.2 Configuring Subscriber Roles
Table 5-6 Configure subscriber roles
Step
Subscriber number type configuration
1
Configuration
task
Select [System View/Location
Server/Gateway/the gateway where the
subscriber to be configured is
located/Subscriber/the subscriber to be
Enable/disable
configured] in the navigation tree, and
the call limit
Select [Group Limited Call] in the
group service
configuration window to enable the call
for a
limit group service.
subscriber
Clear this check box to disable the call
limit group service.
Command: srv-switch group-limited-call
(subscriber number view)
Configure
other call
Refer to
services
XE IP PBX Configuration
Configuration
task
1)
2)
Add one or
more
3)
subscriber
number types
You can click <Add> in the [Add List Item]
dialog box to batch add subscriber number
types.
Command: subscriber-type (LS view)
Chapter 5 Call Service Configuration
Description
Call Service
Overview.
Overview.
Description
Select
[System
Server/Subscriber
navigation tree.
Click <Add> in the configuration window
to bring up the [Add List Item] dialog
box.
Set the subscriber type correctly and
click <Ok>.
5-7
Remarks
Required
Optional
Remarks
View/Location
Type]
in
the
Required
Advertisement
Table of Contents
