Gui Server Configuration Example - H3C XE 200 User Manual

User Manual
H3C XE 200/2000 IP PBX G-Remote

2.2.7 GUI Server Configuration Example

I. Network requirements
Enable the GUI server on the XE IP PBX and enable the Web service.
II. Configuration procedure
<XE>system-view
# Configure the Ethernet interface.
[XE]interface ethernet 0/0
[XE-Ethernet0/0]ip address 192.168.80.50 255.255.255.0
[XE-Ethernet0/0]quit
# Configure the GUI server.
[XE]gui
[XE-gui]gui-config interface ethernet 0/0
# Enable the GUI server.
[XE-gui]start
# Enable the Web service.
[XE-gui]web start
Chapter 2 GUI Server Configuration
2-7