Configuring The Voip Network Dialup Scheme - H3C XE 200 User Manual

User Manual
H3C XE 200/2000 IP PBX G-Remote

4.2.7 Configuring the VoIP Network Dialup Scheme

I. Configure a static route prefix
Table 4-14 Configure a static route prefix
Step
Basic configuration
1
2
3
Configuration
task
1)
2)
Add a static
route prefix
3)
4)
Command: prefix (LS-GW view); prefix
(LS-OFFICEGROUP view)
1)
Configure the
2)
priority of a
static route
3)
prefix
4)
Command: priority (PREFIX view)
1)
2)
Configure the
3)
attribute of a
static route
4)
prefix
Select the FXS option if the static route
prefix is a subscriber number.
Select the relay option if the static route
prefix is a relay number.
Command: otapc (PREFIX view)
Description
Expand [System
Server/Gateway]
View/Location Server/Office Group] in
the navigation tree.
Select the gateway or office group to be
configured and then [Prefix].
Click <Add> in the configuration window.
Set the static route prefix correctly in the
[Add List Item] dialog box.
Expand [System
Server/Gateway]
View/Location Server/Office Group] in
the navigation tree.
Select the gateway or office group to be
configured
Select [Prefix] and then the static route
prefix to be configured.
Set the priority correctly in the [Add List
Item] dialog box.
Expand [System
Server/Gateway]
View/Location Server/Office Group] in
the navigation tree
Select the gateway or office group to be
configured.
Select [Prefix] and then the static route
prefix to be configured
Set the channel correctly in the [Add List
Item] dialog box:
4-25
Chapter 4 XE IP PBX Configuration
Remarks
View/Location
or [System
Required
View/Location
or [System
Optional
View/Location
or [System
Optional