Supero FatTwin F617H6-FT+ User Manual page 125

 SOL Confi guration
Serial Port
Select Enabled to enable the SOL serial port. The options are Enabled and
Disabled.
Device Settings
This item displays the settings of the SOL serial port.
SOL Change Settings
This option specifi es the base I/O port address and the Interrupt Request address
of the SOL Port. Select Disabled to prevent the serial port from accessing any
system resources. When this option is set to Disabled, the serial port becomes
unavailable. The options are Auto, IO=3F8h; IRQ=4; IO=3F8h; IRQ=3; IO=2F8h;
IRQ=3; IO=3E8h; IRQ=5; IO=2E8h; IRQ=7; IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11,
12; IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
SOL Device Mode
Use this feature to select the desired mode for a serial port specifi ed. The options
are Normal and High Speed.
 Serial Port Console Redirection
COM, SOL
These two submenus allow the user to confi gure the following Console Redirection
settings for a COM Port specifi ed by the user.
COM Console Redirection, SOL Console Redirection
Select Enabled to use a COM Port selected by the user for Console Redirection.
The options are Enabled and Disabled. The default setting for COM is Disabled.
The default setting for SOL is Enabled.
 Console Redirection Settings
This feature allows the user to specify how the host computer will exchange
data with the client computer, which is the remote computer used by the user.
7-19
Chapter 7: BIOS