Supero FatTwin F617H6-FT+ User Manual page 69

Notes:
1. For the latest CPU/Memory updates, please refer to our website at
www.supermicro.com/products/motherboard/
2. Use only the correct type of onboard CMOS battery as specifi ed by the
manufacturer. Do not install the onboard battery upside down to avoid
possible explosion.
3. Jumpers not indicated are for test purposes only.
4. All graphics shown in this manual were based upon the latest PCB Revision
available at the time of publishing of the manual. The motherboard you've
received may or may not look exactly the same as the graphics shown in this
manual.
Jumper
JBT1
2 2
JI C1/JI C2
JPB1
JPG1
JPL1
JPS1
JWD1
LED
BMC_HB_LED1
HDD_ACT_LED1
HDD_Fault_LED1
Failure_LED1
SAS_HB_LED1
SAS_Fault_LED1
SAS_Fault_LED2
UID_LED1
X9DRFF-7+/7T+ Jumpers
Description
Clear CMOS
SMB to PCI-E Slots
BMC Enable
VGA Enable
LAN1/LAN2 Enable
SAS Enable
Watch Dog Timer Enable
X9DRFF-7+/7T+ LED Indicators
Description
BMC Heartbeat LED
HDD Activity LED
HDD Error LED
BMC Failure
SAS Heartbeat LED
SAS Error LED 1
SAS Error LED 2
UID LED
5-15
Chapter 5: Advanced Motherboard Setup
for details.
State
Green: Blinking
Green: Blinking
Red: On
Red: On
Green: Blinking
Red: On
Red: On
Blue: On
http://
Default Setting
See Section 5-8
Open (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)
Status
BMC Normal
HDD Active
Error(s) in HDD
Connections
BMC Failure
SAS Normal
Error(s) in SAS
Connections
Error(s) in SAS
Connections
Unit Identifi ed