Supero FatTwin F617H6-FT+ User Manual page 72

FatTwin F617H6-FT+/FTPT+ USER'S MANUAL
Ethernet Ports
Two Ethernet ports (LAN1, LAN2)
are located on the I/O backplane.
These Ethernet ports support 10G
LAN connections on the X9DRFF-7T+
serverboard, and 1G LAN connections
on the X9DRFF-7+ serverboard.
In addition, an IPMI LAN port is also
located on the backplane. All these ports
accept RJ45 cables. Please refer to
the LED Indicator Section for LAN LED
information.
Serial Port
A serial port (COM1) is located next to
the IPMI LAN port on the motherboard.
COM1 provides serial connection
support. See the table on the right for
pin defi nitions.
T-SGPIO 1/2 & 6-SGPIO 1/2 Headers
Four SGPIO (Serial-Link General
P u r p o s e I n p u t / O u t p u t ) h e a d e r s
(T-SGPIO 1/2 & 6-SGPIO 1/2) are
located on the motherboard. These
headers support onboard Serial_Link
interface connections.
Note: T-SGPIO 1/2 support onboard
SATA connections. 6-SGPIO 1/2 support
SAS interface onboard connections.
LAN Ports (LAN1/2)
Pin# Defi nition
1 P2V5SB
2 TD0+
3 TD0-
4 TD1+
5 TD1-
6 TD2+
7 TD2-
8 TD3+
9 TD3-
NC indicates no connection.
Serial Port Pin Defi nitions
Pin # Defi nition
1 DCD
2 RXD
3 TXD
4 DTR
5 Ground
NC indicates no connection.
Pin Defi nitions
Pin# Defi nition
1 NC
3 Ground
5 Load
7 Clock
NC indicates no connection.
5-18
Pin Defi nition
Pin# Defi nition
10 SGND
11 Act LED
12 P3V3SB
13 Link 100 LED
(Yellow, +3V3SB)
14 Link 1000 LED
(Yellow, +3V3SB)
15 Ground
16 Ground
17 Ground
18 Ground
(COM1)
Pin # Defi nition
6 DSR
7 RTS
8 CTS
9 RI
10 NC
T-SGPIO 1/2
S-SGPIO 1/2
Pin Defi nition
2 NC
4 Data
6 Ground
8 NC