Operation; Overview; Connections And Control Devices; Connecting Welding And Return Cables - ESAB ES 300i Instruction Manual

5 OPERATION

5 OPERATION
5.1

Overview

General safety regulations for handling the equipment can be found in the chapter
"Safety." Read it before you start using the equipment.
NOTE!
When moving the equipment, use the handle. Never pull the cables.
WARNING!
Electric shock! Do not touch the workpiece or the welding head during operation!
5.2

Connections and control devices

1. Setting panel
2. Positive welding terminal
3. Negative welding terminal
4. Connection for remote control unit
NOTE!
Always use the cover when the USB connection is not in use.
5.3

Connecting welding and return cables

The power source has two outputs, a positive welding terminal (+) and a negative welding
terminal (-), for connecting welding and return cables. The output to which the welding cable
is connected depends on the welding method or type of electrode used.
0463 417 001
5. Mains power supply switch, I/O
6. USB connection
7. Power cable
- 17 - © ESAB AB 2016