Table of Contents
Advertisement
5 OPERATION
5.8
Setting panel
1.
VRD function (reduced open-circuit
voltage) indicator.
2.
Overheating indication.
3.
Indication of welding method: stick
(SMAW) with cellulose electrode or TIG
(GTAW).
4.
Select welding method, indicated by (3).
5.
Knob for setting data.
5.8.1
Navigation
Parameter selection
By pressing the button (9), different values can be shown and changed. Use the knob (5) to
change the values. Sequence:
1.
Set current values.
2.
Measure current values.
3.
Soft/Crisp, 0–100%. (only stick (SMAW))
Set parameter
The set indicator (8) illuminates when a value can be changed. It cannot be changed from
the panel when a remote is activated. Trying to change a value while in measured value
mode results in automatically switching to set current value mode.
0463 417 001
6.
Display, shows set or measured value.
7.
Display parameter indicator.
8.
Set indicator.
9.
Select parameter to show in display,
indicated by (7).
- 20 -
© ESAB AB 2016
Advertisement
Table of Contents
