Allen-Bradley Micro800 2080-MEMBAK-RTC2 User Manual page 12

Chapter 1 Micro800 Plug-in Modules
2
Micro800 Plug-in Modules
Module Type
2080-OF2 Analog
2080-TC2 Specialty
2080-RTD2 Specialty
(1)
2080-MEMBAK-RTC Specialty
(1)
2080-MEMBAK-RTC2 Specialty
2080-TRIMPOT6 Specialty
2080-MOT-HSC Specialty
2080-DNET20 Communication 20-node DeviceNet scanner
2080-SERIALISOL Communication RS232/485 isolated serial port
(1) 2080-MEMBAK-RTC and 2080-MEMBAK-RTC2 are not supported on Micro820 controllers.
2080-MEMBAK RTC is not supported on Micro870 controllers.
Number of support for Micro800 plug-ins on the controllers are summarized in
the following table.
Plug-in Slots on Micro800 Controllers
Controller Number of Plug-in Slots
Micro810 0
Micro820 2
Micro830 2 (10/16 points)
3 (24 points)
5 (48 points)
Micro850 3 (24 points)
5 (48 points)
Micro870 3
ATTENTION: Removal and Insertion Under Power (RIUP) is not supported
on all Micro800 plug-in modules, except on the 2080-MEMBAK-RTC and
2080-MEMBAK-RTC2 modules.
ATTENTION: Micro800 plug-in modules can be installed on any plug-in
slot on the controller, except for the 2080-MEMBAK-RTC and
2080-MEMBAK-RTC2 modules which can only be installed on the leftmost
plug-in slot.
Description
2-channel, Non-isolated unipolar voltage/current
analog output
2-channel, non-isolated thermocouple module
2-channel, non-isolated RTD module
Memory backup and high accuracy RTC, 1 MB
Memory backup and high accuracy RTC, 4 MB
6-channel trimpot analog input
High speed counter
Rockwell Automation Publication 2080-UM004D-EN-E - March 2018