Advertisement
Quick Links
Installation Instructions
Communication Modules
Catalog Numbers 2711P-RN6, 2711P-RN6K, 2711P-RN15S, 2711P-RN15SK
Topic
Important User Information
Install a Communication Module
Install a Communication Module
About This Publication
This document provides instructions on how to install or replace a communication module on a
PanelView Plus 700, 1000, 1250, or 1500 terminal.
(1)
Cat. No.
2711P-RN6
2711P-RN6K
2711P-RN15S
2711P-RN15SK
(1)
These installation instructions also apply to other cat. no. 2711P-RNxx communication modules.
(2)
Only supported on PanelView Plus 700 to 1500 terminals running FactoryTalk View Machine Edition software,
version 5.1 or earlier.
The communication module installs over the logic module. The installation is the same for all
communication modules regardless of communication type.
IMPORTANT
Additional Resources
You can view or download publications at
http://www.rockwellautomation.com/literature/. To order paper copies of technical
documentation, contact your local Rockwell Automation distributor or sales
representative.
Communication
DH+
DH-485
•
•
•
•
The logic module must be attached to a PanelView Plus display module before you attach
the communication module.
Page
2
3
4
(2)
Remote I/O
ControlNet
•
•
Conformal
Coated
•
•
•
•
Marine
Certified
•
•
Advertisement
Related Manuals for Allen-Bradley 2711P-RN6K
Summary of Contents for Allen-Bradley 2711P-RN6K
- Page 1 Installation Instructions Communication Modules Catalog Numbers 2711P-RN6, 2711P-RN6K, 2711P-RN15S, 2711P-RN15SK Topic Page Important User Information Install a Communication Module Install a Communication Module About This Publication This document provides instructions on how to install or replace a communication module on a PanelView Plus 700, 1000, 1250, or 1500 terminal.
- Page 2 Communication Modules Important User Information Solid-state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (Publication SGI-1.1 available from your local Rockwell Automation sales office or online at http://www.rockwellautomation.com/literature/) describes some important differences between solid-state equipment and hard-wired electromechanical devices.
- Page 3 Communication Modules Install a Communication Module WARNING: Explosion Hazard Do not connect or disconnect any communication cable with power applied to this device or any device on a network. An electrical arc could cause an explosion in hazardous location installations. Be sure power is removed or the area is known to be nonhazardous before proceeding.
- Page 4 Install a Communication Module on page 3. Allen-Bradley, DH+, FactoryTalk View Machine Edition, PanelView Plus, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies. Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400...