Forward Collision Mitigation System (Fcm) (If So Equipped) - Mitsubishi Outlander 2017 Owner's Manual

"Short"
To activate conventional cruise
control
Press and hold the "ACC ON/OFF" switch
while the operation mode is in the "ON" posi-
tion. A buzzer will sound and the multi infor-
mation display will show the following
indicator.
The conventional cruise control is turned off
when the operation mode is tuned off.
For operation of the cruise control, refer to
"Cruise control" on page 5-102.
NOTE
 The conventional cruise control does not
sound or display the approach alarm, will not
adjust your vehicle speed, and does not con-
trol the distance between your vehicle and a
vehicle in front.
General information
FCC ID:OAYARS3-B (for vehicles sold in
the U.S.A)
IC: 4135A-ARS3B (for vehicles sold in the
Canada)
This device complies with Part 15 of FCC
N00582000029
Rules and Industry Canada licence-exempt
RSS standard(s).
Operation is subject to the following two con-
ditions.
 this device may not cause harmful inter-
ference.
 this device must accept any interference
received, including interference that may
cause undesired operation.
CAUTION
 Changes or modifications not expressly
approved by the manufacturer for compli-
ance could void the user's authority to oper-
ate the equipment.

Forward Collision Mitigation System (FCM) (if so equipped)

N00582100020
Forward Collision Mitiga-
tion System (FCM)
equipped)
The Forward Collision Mitigation System
(FCM) is designed to help reduce the risk of a
collision with a vehicle or a pedestrian
straight ahead of your vehicle. The FCM uses
a sensor (A) to determine the distance and
relative speed to a vehicle and a pedestrian in
front. The FCM is not designed as an auto-
matic driving system or as a collision avoid-
ance system.
When your vehicle is approaching a vehicle
or a pedestrian straight-ahead in your path
(if so
N00577300066
Features and controls 5-117
5